PRO LIQUID FINISH™ RS

PRO LIQUID FINISH™ RS (sand-free) is a sand-free, abrasion/scratch resistant, super-high fluidity, fast-curing, polymer-modified, calcium aluminate cement-based hybrid product that can be used as a self-leveling underlayment or patching compound (depending upon the amount of water added). This super-high fluidity self-leveling underlayment can either be pumped or trowel applied from 1.5 mm (1/16″) up to 12 mm (1/2″) in thickness. When the product is used as a self-healing patching compound, it has a longer typical pot life and can be applied from 1.5 mm (1/16″) up to 12 mm (1/2″) in thickness. PRO LIQUID FINISH RS (sand-free) is made with HYDRO GEL in its formulation to create an ultra-smooth and ultra-fine finish that requires no sanding. The amazing Hydro Gel technology allows the product to be used very thin as a self-leveling underlayment OR used as a self-healing, high-performance patch, depending upon the application. The first and only product of its kind!

Features

SAND-FREE
Abrasion/Scratch resistant
Mix only with water
For use over concrete and exterior-grade plywood surfaces
For interior institutional, commercial and residential applications
Qualifies as part of PROMA’s LIMITED WARRANTY PROGRAM up to a LIFETIME(contact PROMA for details)
Compatible with all setting materials, adhesives, and floor coverings including wood parquet and rubber
Can be barrel mixed or pumped through most standard pumps
Can be applied over substrates up to 90% RH per ASTM F2170 (water of convenience)
Can be used as a thermal mass over hydronic and electric radiant systems
Blocks pH when installed greater than 5 mm (3/16″) thick
Will not promote mold, mildew or bacteria growth
No VOC
Product characteristics improves indoor air quality compared to Portland cement-based products
Eco friendly for users of the material
Meets or exceeds ANSI A118.16 requirements
Contributes to LEED^® and WELL™ objectives and requirements
Intertek Clean Air GOLD Certified – conformance to California Department of Public Health (CDPH) Standard Method v1.2

As a Self-leveling Underlayment:

Creates an ultra-smooth, sand-free, level and uniform surface
Pour from 1.5 mm (1/16″) up to 12 mm (1/2″) in a single application
FAST-SETTING: install ceramic tiles, porcelain or natural stones after 3 hours, and resilient floor covering, carpet, laminate flooring, engineered wood and wood parquet after 24 hours
Super flow properties
Use with uncoupling membranes (no primer required)
Use with uncoupling membranes with underfloor heating systems (no primer required)
Meets or exceeds compression and flatness requirements ASTM F710 (Standard Practice for Preparing Concrete Floors to receive Resilient Flooring)
Meets or exceeds compression and flatness requirements ASTM F2873 (Standard Practice for the installation of Self-Leveling Underlayment, and the Preparation of Surfaces to Receive Resilient Flooring)

As a Patching Compound: