Features

• Creates a smooth, level, and uniform surface
• Pour from 3 mm (1/8″) up to 38 mm (1 1/2″) in a single application
• Install ceramic tiles, porcelain or natural stones after 24 hours, and resilient floor covering, carpet, laminate flooring, engineered wood and wood parquet after 48 hours
• Mix only with water
• For use over concrete and exterior-grade plywood surfaces
• For interior institutional, commercial and residential applications
• Compatible with all setting materials, adhesives, and floor coverings including wood parquet and rubber
• Use with uncoupling membranes (no primer required)
• Use with uncoupling membranes with underfloor heating systems (no primer required)
• Can be barrel mixed or pumped through most standard pumps
• Can be used as a thermal mass over hydronic and electric radiant systems
• Can be applied over substrates up to 90% RH per ASTM F2170
• Super flow properties
• Blocks pH when installed greater than 5 mm (3/16″) thick
• Will not promote mold, mildew or bacteria growth
• ZERO VOC
• Product characteristics improves indoor air quality compared to Portland cement-based products
• Eco friendly for users of the material
• Meets or exceeds compression and flatness requirements ASTM F710 (Standard Practice for Preparing Concrete Floors to receive Resilient Flooring)
• Meets or exceeds compression and flatness requirements ASTM F2873 (Standard Practice for the installation of Self-Leveling Underlayment, and the Preparation of Surfaces to Receive Resilient Flooring)
• Contributes to LEED® and WELL objectives and requirements
• Intertek Clean Air GOLD Certified – conformance to California Department of Public Health (CDPH) Standard Method v1.2
• Meets or exceeds ANSI A118.16 requirements
• Contributes to LEED^® and WELL^® objectives and requirements