Features
- Silica sand free
- Pour from 3 mm (1/8″) to 50 mm (2″) thick in a single application
- 30% lighter than the original formula
- 28 days-dried density: 1.2 kg/L or 75 lb/ft3
- 14.6 kg (32 lb) of PRO FLOWLEVEL 40 LIGHT provides coverage equal to 22.7 kg (50 lb) of the regular PRO FLOWLEVEL 40
- Walking time: 3 to 4 hours after pour; light traffic: 24 hours after pour
- Creates a smooth, level and uniform surface
- Formulated with PROMA’s exclusive Stabilized Technology™, which minimizes movement and shrinkage during curing for superior results
- Greatly reduces the need for shotblasting and profiling saving valuable time and money
- Install ceramic, porcelain or natural stones, resilient floor covering, carpet, laminate flooring, engineered wood and wood parquet after 48 hours (when poured at a thickness of 6 mm [1/4″] or less)
- Mix only with water
- For interior institutional, commercial and residential applications
- Compatible with most setting materials, adhesives and floor coverings including wood parquet and rubber, once dried and sealed
- Can be barrel mixed or pumped through most standard pumps
- Can be used for encapsulation over asbestos based tiles and some glue residues
- Can be used as a thermal mass over hydronic and electric radiant systems
- Excellent compressive strength and flexural resistance
- Low Shrinkage
- Will not promote mold, mildew or bacteria growth
- No VOC
- Eco friendly for users of the material
- Contains Recycled Materials (43% Pre-consumer, 17% Post-Consumer) – Exceeds LEED® objectives and requirements
* Refer to Drying Time table in Curing and Protection section for further details.
Data Sheet
