9801, Parkway, Anjou, Québec Canada H1J 1P3
1 866.51.PROMA (77662)

PRO CEMIX™ WS

PRO CEMIX™ WS is a polymer-modified fast-setting, pre-blended, shrinkage-free, abrasion resistant, calcium aluminate cement-based mortar formulated with Corrosion Guard™ protection for concrete repair, topping, floating topping and for building new screeds. PRO CEMIX WS allows foot traffic and ceramic tile installation after 3-4 hours and floor covering installation after 24-48 hours.

Features

  • Generates very high compressive strengths (> 55 MPa [> 8,000 psi])
  • Apply from 10 mm (3/8″) up to 10 cm (4″) in thickness
  • Wearing surface and abrasion resistant
  • Shrinkage-free
  • Formulated with Corrosion Guard™ protection
  • FAST-SETTING: Foot traffic, install tile or apply self-leveling after 3-4 hours and floor coverings after 24-48 hours
  • Can be mixed with PRO SET PLUS™ for better performance
  • Up to 20% (4.5 kg [10 lbs] per 22.7 kg [50 lb] bag) of 10 mm (3/8″) pea gravel can be added for thicker application from 25 mm (1″) up to 20 cm (8″) thick for deep repair (contact PROMA’s Technical Service Department for proper advice and recommendations)
  • For use over concrete, OSB and exterior-grade plywood surfaces
  • For interior and exterior, institutional, commercial and residential applications
  • Compatible with all setting materials, adhesives, and floor coverings including wood parquet and rubber
  • Blocks pH
  • Will not promote mold, mildew or bacteria growth
  • No VOC
  • Product characteristics improves indoor air quality compared to Portland cement-based products
  • Eco friendly for users of the material
  • Contributes to LEED® objectives and requirements

Packaging

22.7 kg (50 lb) bag

Documentation

Data Sheet

SDS

Calculator

Use this convenient calculator to determine how much product you will need for a project.