Features
- Silica sand free
- Creates a smooth, level, and uniform surface
- 25% lighter than the original formula
- 28 days-dried density: 1.4 kg/L or 88 lb/ft3
- 15.8 kg (35 lb) of PRO PLAN CG LIGHT provides coverage equal to 22.7 kg (50 lb) of the regular PRO PLAN CG
- Pour from 3 mm (1/8″) up to 38 mm (1 1/2″) in a single application
- FAST-SETTING: install ceramic tiles, porcelain or natural stones after 3 hours, and resilient floor covering, carpet, laminate flooring, engineered wood and wood parquet after 24 hours
- Mix only with water
- For use over concrete and exterior-grade plywood surfaces
- For interior institutional and commercial applications
- Compatible with all setting materials, adhesives, and floor coverings including wood parquet and rubber
- Can be barrel mixed or pumped through most standard pumps
- Can be used as a thermal mass over hydronic and electric radiant systems
- Can be applied over substrates up to 90% RH per ASTM F2170
- Super flow properties
- Blocks pH when installed greater than 5 mm (3/16″) thick
- Will not promote mold, mildew or bacteria growth
- No VOC
- Product characteristics improves indoor air quality compared to Portland cement based products
- Eco friendly for users of the material
- Meets or exceeds ANSI A118.16 requirements
- Contains Recycled Materials (43% Pre-consumer, 17% Post-Consumer) – Exceeds LEED® objectives and requirements
Data Sheet
